1 used univ. toolroom milling machine make MAHO, model MH 800, YOM approx. 67, table:
940 x 515 mm, spindle 40 ISO, X/Y/Z = 650/400/450 mm

Acc.: univ. rotating, swivelling and tilting table, swivelling vertical head with autom. quill feed,
machine vice on rotating disc, end support bearing, various tool fixtures, tool cabinet, coolant

PRICE: 7.900,00 EUR

In case of interest please contact us.

1 used open-front eccentric press make EBU, model 75 R, YOM 75, cap. 75 t,
table: 800 x 620 mm, throat 300 mm, stroke 16 – 140 mm, ram adjustment 80 m

PRICE: 6.900,00 EUR

In case of interest please contact us.

1 used automatic hacksaw make KASTO, model PSB 180 AU, YOM 73, cap. up to 180 mm Ø,
feed length 750 mm

Acc.: coolant

PRICE: 4.500,00 EUR

In case of interest please contact us.

1 used vertical bandsaw make PRVOMAJSKA-SELECT, model SU-4, YOM 1983, table: 670 x
670 mm, throat 400 mm, table with hydr. feed, table swivelling

Acc.: band welding and grinding attachment

PRICE: 3.200,00 EUR

In case of interest please contact us.

1 used horiz. surface grinding machine make TOS, model BRH 20 A, YOM 86, grinding range
630 x 200 mm

Acc.: magnetic disc 600 x 200 mm, grinding wheel with flange, wheel trueing attachment,
wet grinding attachment

PRICE: 4.700,00 EUR

In case of interest please contact us.

1 used univ. tool grinding machine make WMW-GOTHA, model SWU 250/III,
YOM 1983, table: 950 x 120 mm, height of centres 130 mm, max. workpiece
length 600 mm, max. grinding length 450 mm, hydr. table movement
Acc.: twist grinding device, cylindrical grinding device, vice, tailstock,
various grinding wheels

PRICE: 6.800,00 EUR

In case of interest please contact us.

1 used spot welding machine make BROWN-BOVERI, model P 2 c, YOM 63, cap. 12,5 kVA, throat 400 mm
PRICE: 1.950,00 EUR

Total list price = 66.600,00 EUR

Special package price = 45.000,00 EUR

In case of interest please contact us.

1 used hydraulic 4-roll bending machine, cap. 3150 x 70 mm, diameter of top roll 600 mm, diameter of
down roll 520 mm, diameter of side rolls 450 mm, with prebending

1. - generally overhauled –
2. - with new electric and new hydraulic system –
3. - excellent running condition –
4. - ready for inspection

Price:   298.000,00 EUR, ex site, free loaded in containers

In case of interest please contact us.

1 used plasma cutting machine make CR-ELECTRONIC, YOM 1989, working range 3200 x 1500 mm,
sheet strength 8 – 10 mm, source of electricity THERMAL DYNAMICS Model BAK 5XR,
CNC PLASMA GRAFIK 1, connected load 380/415 V, 26/23 A, power output 55 A/100 V

PRICE: 20.000,00 EUR

In case of interest please contact us.

1 used CNC toolroom milling machine make MAHO, model MH 1000 C,
 YOM 1985, table: 1250 x 800 mm, 50 ISO, X/Y/Z = 1000/560/800 mm, PHILIPS CNC 432

Acc.:  hydr. swivelling head with hydr. toolpost and autom. quill feed, solid table, electron. hand service panel, coolant

- machine is in very good technical condition and ready for operation –

SPECIAL PRICE:   26.000,00 EUR, CFR international seaport Middle East

In case of interest please contact us.

1 used center lathe with lead screw and feed shaft make GURUTZPE, model SUPER-AT, YOM
approx: 1985, swing 800 mm, distance 2000 mm, spindle bore 250 mm, height of centres in gap
635 mm, length of gap in front of faceplate 280 mm

Acc.: 2 pcs. 3-jaw chuck, 4 pos. toolpost, boring device for carriage, coolant

PRICE: 33.500,00 EUR

Special Price: 29.500,00 EUR, CFR international seaport Middle East

In case of interest please contact us.

1 used vulcanizing press with vertical clamping unit make LBW STEINL, model TM-4500, YOM 1985, clamping force 450 t

PRICE: 29.500,00 EUR

In case of interest please contact us.