1 used 3-roll bending machine make BOLDRINI, YOM approx. 1975, cap. 2000 x 12 mm, diameter of upper roll 240 mm, diameter of two lower rolls 200 mm, with conical bending device  

PRICE: 13.800,00 EUR

In case of interest please contact us.

1 used hydraulic 3-roll bending machine make BERTSCH, model 396 TIPO B, YOM 1986, cap.
3000 x 25 mm, dia. of upper roll = 420 mm, dia. of  lower rolls 400 mm, with pre-bending and conical bending          

PRICE: 56.500,00 EUR

In case of interest please contact us.

1 used hydr. press brake make COMESSA, model PN 300/60, YOM 1978, cap. 300 t x 6000 mm

Acc.: upper and lower dies            

PRICE: 53.500,00 EUR

In case of interest please contact us.

1 used combined section iron shears with punch press and notching attachment make PEDDINGHAUS, model 210 SUPER 16, YOM approx. 1970, for round steel up to 50 mm Ø, square steel 45 x 45 mm, angle steel 100 x 10 mm, notching up to sheet strength of 16 mm, cap. of punch 80 t, Ø 31 in 20 mm  

PRICE: 11.800,00 EUR

In case of interest please contact us.

1 used laser cutting machine make TRUMPF, model TCL 3030, manuf. 1997, with laser TLF 3000 turbo,
cap. of laser 3.000 Watt, working range X/Y/Z  3000/1500/115 mm, for sheet thickness 20 mm (standard steel) or 12 mm (stainless steel) and 8 mm (aluminium),

Acc.: pipe cutting attachment ROTOLAS, up to pipe-Ø 42 mm
cutting length endless, from pipe-Ø 43 mm cutting length 150 – max. 3000 mm
HI-LAS high pressure cutting,
laser cutter head with 5“ lens,
laser cutter head with 7,5” lens,
cutter head quick change device, 
automatic registration of outside edges of sheet, 
capacitive regulation of height (DIAS II),
programmable selection of cutting gas/adjustment of pressure,
programmable cycles of capacity,AutoLas,
automatic pallet changer,
illumination of working space,
conveyor for small parts/scrap,
multi chamber dust extraction, compact dust box,
security light barriers.

PRICE:  138.500,00 EUR, including installation and commissioning

In case of interest please contact us.

1 used hydr. plate shears make HACO, model TS 3006, YOM 1991, cap. 3050 x 6 mm

Acc.: electrical rear stop, front stop  

PRICE: 16.900,00 EUR

In case of interest please contact us.

1 used hydr. plate shears make LVD, model MV 40/5.25, YOM 1974, cap. 4050 x 5,25 mm

Acc.: electr. rear stop, table extensions, front stop

PRICE: 18.800,00 EUR

In case of interest please contact us.

1 used hydr. plate shears make DARLEY, model GS 4100 x 8, YOM 1993, cap. 4100 x 8 mm

Acc.: programmable rear stop, table extensions, front stop

PRICE: 29.700,00 EUR

In case of interest please contact us.

1 used hydr. plate shears make LVD, model MVS 65/13, YOM 1978, cap. 6550 x 13 mm (St 45),

Acc.: electr. rear stop, 2 table extensions à 5000 mm, 3 table extensions à 1000 mm,front stop 5000 mm       

PRICE: 84.500,00 EUR

In case of interest please contact us.

1 horiz. boring and milling machine make LIZENZBAU CERUTTI, model AD 115, YOM 1982, table: 1400 x 1600 mm, spindle-Ø 115 mm, spindle 50 ISO, X/Y/Z = 2500/1500/1500 mm,quill path W = 900 mm,

Acc.: facing slide rest, steady rest 

PRICE: 32.500,00 EUR

In case of interest please contact us.

1 used vertical lathe, one column,  make BERTHIEZ, model 8820, YOM approx. 1960, faceplate-Ø 1040 mm, turning-Ø 1100 mm, max. height of workpiece 1000 mm, 5-pos. tool turret, side carriage

PRICE: 18.500,00 EUR

In case of interest please contact us.

1 used CNC toolroom milling machine make MAHO, model MH 1000 C, YOM 1985, table: 1250 x 800 mm, 50 ISO, X/Y/Z = 1000/560/800 mm, PHILIPS CNC 432

Acc.:    hydr. swivelling head with hydr. toolpost and autom. quill feed, solid table, electron. hand service panel, coolant

PRICE: 28.500,00 EUR

In case of interest please contact us.

used bed-type (gantry type) milling machine make LINE-GSP, YOM 1970, usable length of milling table: 6.000 mm, usable width of milling table: 1.800 mm, usable width for milling
jobs: 2.000 mm, vertical travel of cross traverse: 2.310 mm, travel of vertical quill: 200 mm space requirement: total length: 15.900 mm, total width: 4.400 mm, total height: 4.400 mm
total weight: 36,6 tons                       

PRICE: 110.000,00 EUR

In case of interest please contact us.

1 used CNC copy milling machine make DROOP & REIN, model FSM 1406 D 30 kc f, YOM 1988,
table: 3000 x 1400 mm, spindle ISA 50, X/Y/Z = 2800/1400/1250 mm, with FIDIA-control CNC 11,with DROOP & REIN-copy control System KC, max. table loading 10.000 kg.

Acc.: coolant price new in ´88 is over 1 Mio. DM          

PRICE: 167.500,00 EUR

In case of interest please contact us.

1 used cylindrical grinding machine make WALDRICH, model LT 5000 HP 550, YOM approx. 1970, generally overhauled in 2003 and modified to stepless Servo drives TELEMECANIQUE (for X-axis, workpiece spindle and grinding spindle), height of centres 500 mm, distance 5000 mm, max. grinding-Ø 1120 mm,

Acc.: 1 grinding wheel with flange, 1 grinding wheel separate, wet grindingattachment 

PRICE: 87.500,00 EUR

In case of interest please contact us.