1 used drill tape center make PAC, model 35, YOM 86, table clamping
surface 500 x 300 mm, with 12-pos. tool changer

Acc.: collet fixture, coolant   

PRICE: 9.700,00 EUR

Special :   6.000,00 EUR

In case of interest please contact us.

1 used center lathe with lead screw and feed shaft, make MARTIN,
model D 63, YOM 1964, swing 630 mm, distance 2500 mm

Acc.: faceplate 630 mm Ø, milling attachment with collet fixture (on carriage behind turning centre)

PRICE: 14.500,00 EUR

Special:   10.500,00 EUR

In case of interest please contact us.

1 used turret lathe make PITTLER, model PIREX 63, YOM 60, swing 440 mm, spindle bore 75 mm,

max. material-Ø for bar works 63 mm respectively for chuck works 230 mm, with 16-pos. tool turret

In case of interest please contact us.

1 used cam-controlled precision automatic lathe make SPINNER, model SKS 50/50/G, YOM approx.

72, for finish working of small parts

Acc.: automatic chaser tool attachment   

PRICE: 4.550,00 EUR

Special:  3.200,00 EUR

In case of interest please contact us.

Acc.: various collets for inserts, 3-jaw chuck, various toolpost for slides    

PRICE: 5.200,00 EUR

Special:   3.600,00 EUR

In case of interest please contact us.

1 used single-spindle automatic lathe make INDEX, model C 29, YOM 71, spindle
pass 24 mm, with 8-hole turret, with 2 cross and 2 parting-off slides, with thread
chaser device and multi edge turning device

Acc.: bar loading magazine IEMCA AS 325/32, various change gears

PRICE: 8.700,00 EUR

Special: 6.000,00 EUR

In case of interest please contact us.

1 used horizontal milling machine make EICHLER, model FU 1-10, YOM 74,
table: 1000 x 300 mm, spindle 40 ISO, with connector field control, with jump circuit
control on X-, Y- and Z-axis

Acc.: dividing unit with chuck, various milling cutter arms, coolant 

PRICE: 3.950,00 EUR

Special:  2.800,00 EUR

In case of interest please contact us.

1 used univ. copying and engrave milling machine make HAERLIN, model HPM,
YOM 71, working table: 250 x 200 mm, transmission ratio 1:1 to 1:5

PRICE: 5.500,00 EUR

Special:  4.000,00 EUR

In case of interest please contact us.

1 used univ. toolroom milling machine make SINN, model MS II D, YOM 72, table: 750 x 300 mm,
spindle 40 ISO

Acc.: solid table, vertical head with quill retraction, dividing unit with back stop, end
support, coolant      

PRICE: 6.600,00 EUR

Special:  4.800,00 EUR

In case of interest please contact us.

1 used univ. toolroom  milling machine make PRVOMAJSKA, model ALG 100,
YOM 64, table: 600 x 225 mm, spindle 4 MT

Acc.: vertical head with quill retraction, solid table

PRICE: 3.500,00 EUR

Special:  2.500,00 EUR

In case of interest please contact us.

1 used univ. toolroom milling machine make STANKOIMPORT, model 6 T 75,
YOM 73, table: 630 x 200 mm, spindle MT 4

Acc.: univ.- turning-, swivelling and tilting table, solid table, 2 pcs. vertical heads
(1 with quill retraction), collet fixture with collets, various milling cutter arms, coolant   

PRICE: 5.950,00 EUR

Special:  4.000,00 EUR

In case of interest please contact us.

1 used double-sided eccentric press make EBU-FAVORIT, model 25/220 S,
YOM 69, cap. 25 t, stroke 4 –40 mm, ram adjustment 50 mm, 100 – 300 strokes/min.,
table: 580 x 400 mm, pass between columns 280 mm, with protective screen control
and pneumat. feed device 

PRICE: 4.950,00 EUR

Special:  3.500,00 EUR

In case of interest please contact us.

1 used hydr. double-sided drawing press make LASCO, model FP 75, YOM 1963, cap. 75 t,
700 x 650 mm, ram surface 700 x 600 mm, stroke 650 mm, with cushion

PRICE: 11.900,00 EUR

Special:  8.500,00 EUR

In case of interest please contact us.

1 used stamping press make KAISER, model PZ 20, YOM approx. 60,  cap. 20 t, with collet feed

PRICE: 2.200,00 EUR

Special:  1.500,00 EUR

In case of interest please contact us.

1 used tilting double-sided stamping press make WEINGARTEN, model HW 50,
YOM 63, cap. 50 t, table: 680 x 440 mm, pass between columns 270 mm,
stroke 12 – 80 mm, 72 – 200 strokes/min., ram adjustment 60 mm

PRICE: 7.500,00 EUR

Special:  5.800,00 EUR

In case of interest please contact us.