used CNC tube bending machine make ADDISON, model PB 25, YOM 84, cap.
(tube-Ø x wall strength) = 25 x 1,5 mm, POWERBEND CNC

PRICE: 14.800,00 EUR

Special: 12.500,00 EUR

In case of interest please contact us.

used CNC mandrel tube bending machine make ADDISON, model DB 40 ST, YOM 1985,
cap. (tube-Ø x thickness of wall) = 40 x 3 mm, length of tube min./max. 50/4000 mm, max.
bending angle 193°, DATABEND

PRICE: 15.800,00 EUR

Special: 13.500,00 EUR

In case of interest please contact us.

used mandrel tube bending machine make LANG, model EL 65, YOM 1984,
cap. (tube-Ø x thickness of wall) = 75 x 2 mm, max. bending angle 180°,
bending radius max. 350 mm

Acc.: varios bending blocks and bending inserts

PRICE:  9.800,00 EUR

Special Price:  8.500,00 EUR

In case of interest please contact us.

used hydr. profile bending machine make ZOPF, model C 602 HE, YOM 2002, bending cap.
square 50 x 50 mm, flat steel lying 120 x 25 mm, flat steel on end 80 x 15 mm , angle steel 70 x 70 x 7 mm, round steel 50 mm Ø, diameter of shaft 60 mm, diameter of roll 215 mm      

PRICE:  9.800,00 EUR

Special:  8.500,00 EUR

In case of interest please contact us.

used hydr. notching machine make INDUMASCH, model 206, YOM 1989, table:
1000 x 800 mm, length of knife 200 mm, max. sheet thickness 6 mm standard steel
respectively 4 mm stainless steel, cutting angle continuously adjustable 30° - 135°   

PRICE:  6.900,00 EUR

Special:  6.000,00 EUR

In case of interest please contact us.

1 used CNC bending centre make TRUMPF, model TRUMAFORM 400, YOM 89, overhauled in 1993, max. bending pressure 30 t, max. sheet strength 4 mm, max. bending length 500 mm, with SIEMENS SINUMERIK 850 M, with 8-pos. tool changer

Acc.: separate programming place

PRICE: 68.700,00 EUR

Special:  45.000,00 EUR

In case of interest please contact us.

used combined section iron shears with punch press and notching attachment make MUBEA,
model KBL 11 N, YOM 1971, for round steel max 33 mm Ø, square steel 30 x 30 mm, angle steel
60 x 8 mm, notching cap. max. 10 mm, punch cap. 35 t, Ø 25 in 11 mm resp. Ø 20 in 13 mm

Acc.: tool cabinet with various punches and dies             

PRICE:  5.700,00 EUR

Special: 5.000,00 EUR

In case of interest please contact us.

used punch press make OMES, model P-45, YOM approx. 1975, cap. 45 t, punch cap.
Ø 25 in 15 mm respectively Ø 30 in 13 mm, throat 420 mm

Acc.: approx. 12 sets punches with dies

PRICE: 3.900,00 EUR

Special:  3.500,00 EUR

In case of interest please contact us.

All prices are quoted CFR international seaport Middle East.

1 used horiz. boring and milling machine make VWF PLAUERT, model BFn 100,
manuf. 1970, table: 1400 x 1260 mm, spindle Ø 100 mm, spindle 45 ISO,
X/Y/Z = 1750/1750/1400 mm

Acc.:facing slide rest, digital readout on 3 axis MITUTOYO, steady rest,
sleeve, various tool fixtures, coolant

PRICE: 29.800,00 EUR ex stock

In case of interest please contact us.

1 used horizontal machining centre make KEARNEY & TRECKER, model MM 1015, YOM approx. 90,
pallet size 460 x 460 mm, spindle 50 ISO, X/Y/Z = 610/610/508 mm, KEARNEY & TRECKER GEMINI MODULAR-D,
30-pos. tool changer, pallet pool, coolant through spindle

Acc.: various tool fixtures, chip conveyor, coolant

PRICE: 19.800,00 EUR

Special: 10.000,00 EUR

In case of interest please contact us.

1 used horizontal machining centre make KEARNEY & TRECKER, model MM 1015, YOM approx. 90,
pallet size 460 x 460 mm, spindle 50 ISO, X/Y/Z = 610/610/508 mm, KEARNEY & TRECKER GEMINI MODULAR-D,
60-pos. tool changer, pallet pool, coolant through spindle

Acc.: various tool fixtures, chip conveyor, coolant

PRICE: á 20.800,00 EUR
2 machines in stock –

Special:  á 10.000,00 EUR (per unit)

In case of interest please contact us.

1 used CNC cylindrical grinding machine make OVERBECK, model 600 R-CNC-VA, YOM 92,
height of centers 140 mm, distance 655 mm, max. grinding-Ø 190 mm, with CNC ANC M 370,
with electr. measuring control MOVOMATIC

Acc.: hydr. 3-jaw chuck, hydr. operated stop of work piece, wheel truing attachment

PRICE: 26.500,00 EUR

Special:  12.000,00 EUR

In case of interest please contact us.

used radial drill make GIRARDS, YOM approx. 1970, spindle 4 MT, throat 1250 mm 

Acc.: box table, quick-change chuck, coolant

PRICE: 7.800,00 EUR

In case of interest please contact us.

used vertical upright drilling machine make INFRATIREA, model G 25, YOM 70,
spindle 4 MT, table: 530 x 425 mm, with autom. feed and right/left spindle run     

PRICE: 2.500,00 EUR

In case of interest please contact us.

used center lathe with lead screw and feed shaft make MITSUBISHI-OERLIKON, model DE-B,
YOM approx. 70, swing 450 mm, distance 1000 mm

Acc.: 4-jaw chuck, MULTIFIX toolpost with various inserts, solid steady, copy device
DUPLOMATIC

In case of interest please contact us.

used CNC die sinking spark erosion machine make AGIE, model EMT 1, YOM 1982, table
clamping surface 500 x 250 mm, X/Y = 250/160 mm, quill / eroding stroke 200 mm, AGIEMAT 3,
generator AGIEPULS 60 L 2, generator cap. 40 A,

Acc.: planetary head System 3 R, dielektrikum container with filter 

PRICE: 6.900,00 EUR

In case of interest please contact us.

used univ. toolroom milling machine make SINN, model MS II D, YOM 72, table: 750 x 300 mm,spindle 40 ISO

PRICE: 6.600,00 EUR

In case of interest please contact us.

used automatic hacksaw make KASTO, model PSB 240 AU, manuf. 76, cap. up to 240 mm Ø, feed length 750 mm,

Acc.:various sawblades, chip conveyor, coolant 

PRICE: 4.800,00 EUR

In case of interest please contact us.

used horiz. surface grinding machine make ABA, model FF 600/30 VE, YOM 1981,
grinding range 600 x 300 mm,

Acc.:DRO  X/Y-axis, diaform equipment, magnetic disc 600 x 250 mm, grinding wheel with flange, dressing attachment, wet grinding attachment

PRICE: 8.700,00 EUR

In case of interest please contact us.

Special package price for these seven machines together = 29.500,00 EUR